Equipment Specifications - Keiser INFINITY Series Installation Instructions Manual

INSTALLATION INSTRUCTIONS
FUNCTIONAL TRAINER

EQUIPMENT SPECIFICATIONS

Resistance Range:
50 lbs (23 kg) each Handle
Cable Length:
140 inches (3,556 mm) single Handle
70 inches (1,778 mm) both Handles together
TRAINING SPACE
Plan Training Space accordingly to allow for full-range operation. Actual Cable Length may vary, based on Accessory type, user
height, and the position setting of the exercise Arm.
To safely and effectively use your Training Space, remember to:
1. Clear your Training Space: Ensure there is enough space for safe access and operation of the equipment.
2. Mark your Cable Max Limit: Secure your Cable Accessory to the Cable. Walk your Cable Accessory out until the stop is
reached. This is your Cable Max Limit. Place a marker on the floor (i.e. tape, keys, or a water bottle) to indicate your Cable
Max Limit (see Figure 2).
Length Single Cable
140 inches (3,556 mm)
Cable Max Limit
WARNING: AVOID SERIOUS INJURY OR PROPERTY DAMAGE. Do not attempt to extend the Cable beyond the Cable
Max Limit. Failure to follow this warning will cause the Cable to hit a hard stop, creating a sudden dynamic load that may
result in serious injury or equipment and property damage.
89 inches
(2,261 mm)
59 inches
(1,499 mm)
118 lbs
(54 kg)
Cable Accessory
Cable
Marker
Figure 2. Maximum Cable Length Extension Illustration
32 inches
(813 mm)
96 inches
(2,439 mm)
Figure 1. Equipment Specifications
Length Both Cables
70 inches (1,778 mm)
04
FLOOR MOUNT PLATE
x4 Mount Holes Diameter:
0.5 inch (13 mm)
15.5 inches
(394 mm)
29 inches
(737 mm)
3/8 inch
(9.5 mm)
11.5 inches
(292 mm)