Equipment Specifications - Keiser INFINITY Series Installation Instructions Manual

INSTALLATION INSTRUCTIONS
TRIPLE TRAINER

EQUIPMENT SPECIFICATIONS

FLOOR MOUNT PLATE
22.6 inches
(574 mm)
25.14 inches
(638.56 mm)
3/8 inch
(9.5 mm)
TRAINING SPACE
Plan Training Space accordingly to allow for full-range operation. Actual Cable Length may vary, based on Accessory type, user
height, and the position setting of the exercise Arm.
To safely and effectively use your Training Space, remember to:
1. Clear your Training Space: Ensure there is enough space for safe access and operation of the equipment.
2. Mark your Cable Max Limit: Secure your Cable Accessory to the Cable. Walk your Cable Accessory out until the stop is
reached. This is your Cable Max Limit. Place a marker on the floor (i.e. tape, keys, or a water bottle) to indicate your Cable
Max Limit (see Figure 2).
WARNING: AVOID SERIOUS INJURY OR PROPERTY DAMAGE. Do not attempt to extend the Cable beyond the Cable
Max Limit. Failure to follow this warning will cause the Cable to hit a hard stop, creating a sudden dynamic load that may
result in serious injury or equipment and property damage.
TRIPLE TRAINER
(TOP VIEW)
x3
Mount Holes
Dia.: 0.5 inch
(13 mm)
104 inches
(2,642 mm)
Cable Length:
140 inches (3,556 mm) single Handle
70 inches (1,778 mm) both Handles together
Figure 1. Equipment Specifications
Training
Figure 2. Triple Trainer Training Space Illustration
89 inches
(2,261 mm)
91 inches
(2,312 mm)
Both Handles Together
70 inches (1,778 mm)
Space
04
59 inches
(1,499 mm)
350 lbs
(159 kg)
Resistance Range:
50 lbs (23 kg) each Handle
Single Handle
140 inches (3,556 mm)
96 inches
(2,439 mm)