Equipment Specifications - Keiser INFINITY Series Installation Instructions Manual

INSTALLATION INSTRUCTIONS
TRIPLE TRAINER

EQUIPMENT SPECIFICATIONS

Height, arms up: 89 inches (2,261 mm)
Height, arms down: 59 inches (1,499 mm)
Length: 57 inches (1,448 mm)
Width: 32 inches (813 mm)
Arm Span: 95 inches (2,413 mm)
Weight: 345 lbs (156 kg)
Resistance Range:
• Bilateral 0 - 100 lbs (0 - 45 kg)
• Unilateral 0 - 50 lbs (0 - 23 kg)
Cable Length:
• Unilateral 144 inches (3,658 mm)
• Bilateral 72 inches (1,829 mm)
TRAINING SPACE
Refer to Figure 1 for the minimum Training Space required. Plan Training Space accordingly to allow for full-range operation.
Actual Cable Length may vary, based on Accessory type, user height, and the position setting of the exercise Arm.
To safely and effectively use your Training Space, remember to:
1. Clear your Training Space: Ensure there is enough space for safe access and operation of the equipment.
2. Mark your Cable Max Limit: Secure your Cable Accessory to the Cable. Walk your Cable Accessory out until the stop is
reached. This is your Cable Max Limit. Place a marker on the floor (i.e. tape, keys, or a water bottle) to indicate your Cable
Max Limit (see Figure 2).
Unilateral Cable Length
144 inches (3,658 mm)
Cable Accessory
Cable Max Limit
WARNING: AVOID SERIOUS INJURY OR PROPERTY DAMAGE. Do not attempt to extend the Cable beyond the Cable
Max Limit. Failure to follow this warning will cause the Cable to hit a hard stop, creating a sudden dynamic load that may
result in serious injury or equipment and property damage.
Training Space
Cable
Marker
Figure 2. Maximum Cable Length Extension Illustration
Figure 1. Triple Trainer Training Space
Bilateral Cable Length
72 inches (1,829 mm)
04
Bilateral Cable Length
72 inches (1,829 mm)
Unilateral Cable Length
144 inches (3,658 mm)