ASSEMBLY
RECOMMENDED TOOLS REQUIRED
•
Pliers
•
Adjustable Spanner
•
10mm Wrench x2
•
13mm Wrench
STEP 1 - Wheels
•
When assembling the wheels make sure the air valves are facing outward.
•
Slide the wheel bushing (#19) onto the left side of the axle.
•
Push one wheel (#15) onto the axle. Align the hole in the axle and wheel and insert the M6x60
bolt (#24) and secure with a M6 lock nut (#9).
•
Slide the other wheel bushing (#19) onto the right side of the axle.
•
Push the wheel (#15) onto the axle. Slip the Ø16 flat washer (#17) and insert the Ø5x35 cotter
pin (#16) into the hole and fasten it by bending.