The Handy THTS Operators Manual & Parts Lists

80lbs towed spreader
Hide thumbs Also See for THTS:

Advertisement

Quick Links

OPERATOR'S MANUAL & PARTS LIST
MODEL – THTS
80lbs TOWED SPREADER
Spares & Support: 01793 333212
Please read & understand this manual, paying particular attention to the
safety instructions, before use.
The manufacturer reserves the right to change the product specification and
livery according to continued product improvements.
193849001
19/06/2015

Advertisement

Table of Contents
loading

Summary of Contents for The Handy THTS

  • Page 1 OPERATOR’S MANUAL & PARTS LIST MODEL – THTS 80lbs TOWED SPREADER Spares & Support: 01793 333212 Please read & understand this manual, paying particular attention to the safety instructions, before use. The manufacturer reserves the right to change the product specification and livery according to continued product improvements.
  • Page 3: Table Of Contents

    Assembly Is Required This product requires assembly before use. See the “Assembly” section for instructions. Please check that all parts required for the assembly of this spreader are included. If for any reason you believe a part for the assembly is missing or damaged, please contact us. CONTENTS SAFETY INSTRUCTIONS SPECIFICATION...
  • Page 4: Safety Instructions

    SAFETY INSTRUCTIONS Read and understand the owner’s manual and labels affixed to the machine. Learn its application and limitations as well as the specific potential hazards. Retain these instructions for future reference. The operator is responsible for following the warnings & instructions in this manual and on the product.
  • Page 5: Specification

    Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. SPECIFICATION Model THS50 Product Number 193848001 Weight 10.3kg Capacity (Weight) 23kg Wheel Diameter 176mm Tyre 4.10/3.50-6 Tyre Rating 2 Ply Tyre Maximum PSI 25psi (Do not exceed) The manufacturer reserves the right to change the product specification and livery according to...
  • Page 6: Components

    COMPONENTS...
  • Page 7: Assembly

    ASSEMBLY STEP 1  Install the impeller onto the gearbox and axle assembly.  Align the impeller with the hole on the axle, located nearest the gearbox.  Insert M4x20 screw, through the side of the impeller and the gearbox axle. Tighten until secure.
  • Page 8 STEP 4  Install the end of the frame brace onto the hopper frame using M6x35 hex bolt & M6 lock nut.  Install the other end of the frame brace and fix using M6x45 hex bolt.  Do not fully tighten the nuts and bolts. STEP 5 ...
  • Page 9 STEP 6  Install the pivot and bracket assembly onto the lower handle using a M6x45 hex bolt and a M6 lock nut.  Now go back and tighten all the nuts and bolts, starting at Step 1.  Do not over tighten. STEP 7 ...
  • Page 10 STEP 8  Push the handle to the lowest position. • Take off one of the nuts on the pivot and bracket assembly and insert head of threaded pole into the hole of this part. • Reattach the nut and tighten STEP 9 •...
  • Page 11: Operation

    STEP 10 • Following the instructions on the diagram, adjust the position of the two nuts on the threaded pole. • When the handle is in the closed position (downwards) the adjustable plate should cover the large hole at the bottom of the hopper thereby ensuring that no material can fall through. •...
  • Page 12: Rate Settings

    RATE SETTINGS Precision spreaders are designed to spread dry, powdered or granulated materials thinly and evenly over reasonably smooth surfaces.  Ensure that the material is dry and free-running. If in doubt pass it through a sieve with 3mm mesh to remove lumps. ...
  • Page 13 RECOMMENDED GUIDE APPLICATION RATE MANUFACTURER PRODUCT NAME OR ANALYSIS SEASON OF USE SETTING G/M2 OZ’S/YD2 FISONS EVERGREEN 90 EXTRA LAWNFOOD MOSSKILL EIGBY TAILOR 9.7.7/7.7.7./3.12.12 Spring & Autumn PROFESSIONAL 10.15.10/12.6.6. Spring & Autumn ORGANIC N Spring MINIGRAN All Seasons MICRO FINE All Seasons J A BOWERS FEED &...
  • Page 14 WEED & FEED EXTRA Apr-Sept Inclusive CF GRAN 1&4 Spring & Summer CF GRAN 2 Autumn & Winter MICRO GRAN 1,3&4 Spring & Summer MICRO GRAN 2 Autumn & Winter PARKER No.1 Spring & Summer No.2 Spring & Summer No.4 Autumn &...
  • Page 15: Parts Diagram

    PARTS DIAGRAM...
  • Page 16: Parts List

    PARTS LIST Part No Description Part No Description TH137-1 Handle Spacer TH137-25 Control Rod A TH137-2 Bolt M6x25 TH137-26 Handle Shaft TH137-3 Washer Ø8 TH137-27 Shut off plate Gauge & Lever TH137-4 TH137-28 Flat Washer Ø4 Assembly TH137-5 Adjust Handle Pole TH137-29 Screw Ø4x12 TH137-6...
  • Page 17 GJ HANDY & CO LTD USER WARRANTY POLICY 1. Users Statement of Warranty  Each new machine is warranted against defective material or assembly of material under normal usage. The warranty applies to the original purchaser and covers faulty parts and the labour involved in replacing and repairing those parts, which are of original manufacture.
  • Page 18 GJ HANDY & CO LTD USER WARRANTY POLICY 3. Not covered by this warranty  The warranty policy does not cover any depreciation or damages caused by ordinary wear, rusting or corrosion, lack of correct maintenance or operation, misuse, abuse, lack of transportation or accident.
  • Page 20 To order spare parts and see the complete range of garden machinery and garden equipment from Handy, visit: www.thehandy.co.uk Spares & Support: 01793 333212...

Table of Contents