Page 1
INSTRUCTION MANUAL 125lbs (56.7kgs) HEAVY DUTY PUSH SPREADER Model No: THS125HDUTY -- Product No: 1938152001 ASSEMBLY REQUIRED SAVE THESE INSTRUCTIONS SPARES & SUPPORT: 01793 333212 Please read & understand this manual, paying attention to the safety instructions, before use. The manufacturer reserves the right to change the product specification and livery according to continued product improvements.
CONTENTS SPECIFICATION IMPORTANT INFORMATION GENERAL SAFETY INSTRUCTIONS COMPONENTS ASSEMBLY ADJUSTMENTS OPERATION MAINTENANCE STORAGE PARTS DIAGRAM PARTS LIST WARRANTY ASSEMBLY IS REQUIRED This product requires assembly before use. See the “Assembly” section for instructions. Please check that all parts required for the assembly of this spreader are included. If for any reason you believe a part for the assembly is missing or damaged, please contact us.
SPECIFICATION The manufacturer reserves the right to change the product specification and livery according to continued product improvements. Model THS125HDUTY Product Number 1938152001 Capacity (Weight) 125lbs (56.7kg) Capacity (Litres) Hopper Material Polypropylene Hopper Dimensions 74.9 x 42 x 34.3cm Spread Width 305 –...
GENERAL SAFETY INSTRUCTIONS Read and understand the owner’s manual and labels affixed to the product. Learn its application and limitations as well as the specific potential hazards. Retain these instructions for future reference. The operator is responsible for following the warnings & instructions in this manual and on the product.
Page 6
SAFETY SYMBOLS Safety alert symbol. Used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury. DANGER Indicates an imminently hazardous situation which, if not avoided, will result in serious injury. WARNING Indicates a potentially hazardous situation which, if not avoided, could result in serious injury.
COMPONENTS NOTE: Parts Lists are supplied for information purposes only, not all parts are stocked individually & we recommend you contact our Spares Team on 01793 333212 for expert advice.
ASSEMBLY STEP 1: INSTALLING THE SUPPORT LEG • Attach the support leg (#30) to the installation tube assembly (#14) using square neck bolt M8x45 (#48), camber washer (#22) and nylon lock nut M8 (#20). • Attach the left and right support tube (#28) to the installation tube assembly (#14) using square neck bolt M8x45 (#48), camber washer (#22) and nylon lock nut M8 (#20).
ADJUSTMENTS 3.Adjust the handle to ensure the adjustable plate is fully open or closed. If an adjustment is required, loosen the M6x40 screw and M6 lock nut. Pull the control rod & make sure the adjustable plate operates correctly. Then retighten the screw &...
OPERATION DANGER The product must only be put into operation if no defects are found. It is crucial that any defective parts are replaced before the product is used again. Check the safety equipment and the safe condition of the product. Check all parts to make sure that they fit tightly. Check whether there are any visible defects: broken parts, cracks, etc.
CAUTION The rate settings are guidelines only. Even branded materials may vary in grain size, humidity, density etc. If in any doubt choose a lower setting than that suggested or start at setting no. 2 and adjust as necessary, until an even spread is achieved. WARNING Do not over apply spreading material.
PARTS DIAGRAM NOTE: Parts Lists are supplied for information purposes only, not all parts are stocked individually & we recommend you contact our Spares Team on 01793 333212 for expert advice. PARTS LIST...
Page 14
EC DECLARATION OF CONFORMITY We Handy Distribution Ltd - SN3 5HY (Importer) declare that the product: Designation: 125lbs (56.7kgs) Push Spreader Model(s): THS125HDUTY Product Number: 1938152001 Type/Serial No: As per rating label on machine Complies with the following directives: 2006/42/EC – Machinery Directive...
Page 15
GJ HANDY & CO LTD USER WARRANTY POLICY Users Statement of Warranty Each new machine is warranted against defective material or assembly of material under normal usage. The warranty applies to the original purchaser and covers faulty parts and the labour involved in replacing and repairing those parts, which are of original manufacture.
Page 16
GJ HANDY & CO LTD USER WARRANTY POLICY Not covered by this warranty a) The warranty policy does not cover any depreciation or damages caused by ordinary wear, rusting or corrosion, lack of correct maintenance or operation, misuse, abuse, lack of transportation or accident.
For spares or support of your handy product, please contact us: Tel: 01793 333212 Email: customerservice@handydistribution.co.uk (Mon – Fri 8.00am to 5.30pm excl. Bank Holidays) To see our range of garden machinery & equipment visit: www.thehandy.co.uk Making gardening easier & affordable since 1938 Distributed by Handy Distribution, Murdock Road, Dorcan, Swindon, SN3 5HY...