Assembly Instructions - The Handy THSSALT Operator's Manual And Parts List

Salt spreader

Hide thumbs Also See for THSSALT:

Table of Contents

STEP 1: Attaching the Wheels

1. Slide the wheel bushing (#19) onto the left side of the axle.

2. When assembling the wheels make sure the air valves are facing outwards.

3. Push one wheel (#15) onto the axle. Align the holes in the axle and the wheel and insert the M6x60

bolt (#24) and secure with an M6 lock nut (#9).

4. Slide the other wheel bushing (#19) onto the right side of the axle.

5. Push the wheel (#15) onto the axle. Slip the Ø16 flat washer (#17) and insert the Ø5x35 cotter pin

(#16) into the hole and bend it to secure the assembly.

Assembly Instructions

- 8 -

Table of Contents