The Handy THSSALT Instruction Manual page 9

STEP 2 – Attach Handle to Support Leg
•
Insert handle assembly into the supporting leg (#39). In the center holes put two M6x35 bolts
(#40), Ø6 spring washer (#55) and secure with M6 lock nut (#9).
•
On the outer holes of the handle assembly and supporting leg (#39) put four M6x20 bolts (#47),
Ø6 spring washers (#55) and secure with M6 lock nuts (#9).
Centre
Holes
Flange
Outer
Holes