Table of Contents
Advertisement
MAINTENANCE
LUBRICATE
Maintenance spray or multi-purpose grease can be applied to the wheel axle prior to long-term
storage. Oiling is not necessary.
GEARBOX
Apply multi-purpose grease to the gearbox cogs at the end of each use.
CHECK TYRE INFLATION
Prior to using the Spreader, ensure the tyres are sufficiently inflated. We recommend the use of
FOOT or HAND manual inflation devices only. Do not inflate above 20psi.
CLEANING
After each use thoroughly wash the spreader and clean material out of the hopper.
STORING
Never allow material to stay in the hopper for extended periods of time. Before storing, ensure that
the spreader is clean and dry. Store indoors or in a protected area during severe weather in the
winter months and direct sunlight.
CHECK ALL NUTS, BOLTS AND FASTENING
Periodically check all fastenings are tight & secure.
NEVER EXCEED LOAD CAPACITY
To avoid damaging the spreader, never exceed the rated load capacity of 125LB (56.8kg).
Advertisement
Table of Contents
