Assembly - The Handy THS70HDUTY Instruction Manual

ASSEMBLY

STEP 1: INSTALLING THE SUPPORT LEG
•
Attach the support leg (#29) to the installation tube assembly (#14) using square neck bolt
M6x40 (#28), camber washer (#21) and nylon M6 lock nut (#13).
•
Attach the left and right support tube (#27) to the installation tube assembly (#14) using square
neck bolt M6x40 (#28), camber washer (#21) and nylon M6 lock nut (#13).
ONLY LIGHTLY TIGHTEN THE NUTS & BOLTS
STEP 2: INSTALLING THE HANDLE & LOWER ADJUSTMENT LEVER
•
Attach the handle connecting tube (#31) to the left and right support tube (#27) using square
neck bolt M6x40 (#28), camber washer (#21) and nylon M6 lock nut (#13).
NOW TIGHTEN ALL NUTS & BOLTS SECURELY
•
Connect the lower adjustment lever (#30) to the connecting rod fixed plate (#12) using hex bolt
M6x16 (#11), nylon washer (#2) and nylon M6 lock nut (#13). Tighten the nuts, then loosen a
rotation. Repeat the step of upper adjustment lever (#30) to the handle (#40).