Assembly - The Handy THTS175 Instruction Manual

Gauge Assembly
Chassis Hitch Arm
Hopper
x1
x1
x1
x1
Hitch Bracket
x1
Hitch Brace Support Rod
Wheel & Tyre
Rain Cover
Hopper Screen
x1
X4 Assembly x2
x1
x1

ASSEMBLY

Before assembling the towed spreader, lay out all of the parts and hardware as shown on the previous
pages.
STEP 1
In the following order put flat washer Ø16, wheel spacer, second flat washer Ø16, Tire, third flat washer Ø16
on the end of wheel axle. Insert the cotter pin Ø4x40 into the small hole on the axle and bend to secure.
Rotate the wheel so that the hole on the inside of the wheel is aligned with the hole on the axle, then Insert
drive pin Ø6x45 and lock it.
Chassis
Drive Pin Ø6x45
Flat Washer
Wheel & Tyre
Ø16
Assembly
Cotter Pin
Ø4x40
Wheel Spacer
Flat Washer
Ø16