Assembly - The Handy THS125HDUTY Instruction Manual

ASSEMBLY

STEP 1: INSTALLING THE SUPPORT LEG
•
Attach the support leg (#30) to the installation tube assembly (#14) using square neck bolt
M8x45 (#48), camber washer (#22) and nylon lock nut M8 (#20).
•
Attach the left and right support tube (#28) to the installation tube assembly (#14) using square
neck bolt M8x45 (#48), camber washer (#22) and nylon lock nut M8 (#20).
ONLY LIGHTLY TIGHTEN THE NUTS & BOLTS
STEP 2: INSTALLING THE HANDLE & LOWER ADJUSTMENT LEVER
•
Attach the handle connecting tube (#32) to the left and right support tube (#28) using square
neck bolt M8x50 (#29), camber washer (#22) and nylon lock nut M8 (#20). Tighten all the nuts.
NOW TIGHTEN ALL NUTS & BOLTS SECURELY
•
Connect the lower adjustment lever (#31) to the connecting rod fixed plate (#12) using hex bolt
M6x16 (#11), nylon washer (#2) and nylon lock nut M6 (#13). Tighten the nuts, then loosen a
rotation. Repeat the step of upper adjustment lever (#31) to the handle (#40).