Configuration Basics - Emerson Rosemount Reference Manual

Configuration
September 2019
Table 3-1: Rosemount Smart Pressure Gauge Device Revisions and Files
(1)
(2)
(3)
Figure 3-1: Data Flow
Measured
3.4

Configuration basics

3.4.1 Configuration tools
Configuration requires a Field Communicator or AMS Device Manager. Connect the Field
Communicator leads to the terminals labeled "COMM" on the front of the device (see
Figure 2-1).
When using a Field Communicator, any configuration changes made must be sent to the
device by using the Send key (F2). AMS Device Manager configuration changes are
implemented when the Apply button is selected.
3.4.2 Connection diagrams
Figure 2-1
Device Manager. The Field Communicator or AMS Device Manager may be connected at
"COMM" on the device.
22
Software Identify device
release
date
NAMUR NAMUR
software software
(1)
revision revision
October 1.0.0 1.0.0
2017
NAMUR Software Revision is located on the hardware tag of the device.
HART Software Revision can be read using a HART capable configuration tool.
Device Driver file names use Device and DD Revision (e.g. 10_01). HART Protocol is
designed to enable legacy device driver revisions to continue to communicate with new
HART devices. To access new functionality, the new Device Driver must be downloaded.
It is recommended to download new Device Driver files to ensure full functionality.
process
P A/D
input
illustrates the wiring for a field hook-up with a Field Communicator or AMS
Find device driver
HART HART Device
software universal revision
(2)
revision revision
2 7 1
Micro
Reference Manual
00809-0100-4145
Review Review
instructions functionality
Manual Changes to
(3)
document software
number
00809-0100-41 Initial release
45
Local Display output
Emerson.com/Rosemount