Configuration Tools - Emerson PACMotion VFD PROFINET User Manual

PACMotion VFD PROFINET Configuration User Manual
GFK-3226A
1.1

Configuration Tools

The following tools are required:
PAC Machine Edition (PME): Software used to configure the PACSystems Controller and associated I/O.
The VFDs are treated as I/O devices within the controller framework. PME is also used to develop PLC
logic that resides in the controller and to monitor the application. Refer to Section 2: PROFINET
Configuration Steps.
PROFINET DCP: This is a discovery tool launched from within PME. It is used for PROFINET networks
only. Refer to Section 2: PROFINET Configuration Steps.
PACMotion VFD Studio: This is also launched from within PME. It is used to perform PACMotion VFD
commissioning activities. Refer to Commissioning using PACMotion VFD Studio. Note that PME Release
9.50 SIM10 or later incorporates VFD Studio. USB to RS-485 adaptor (IC866-CABL-USB485) is required
for the VFD Studio tool to communicate with the drive.
1.2 Revisions in this Manual
Revision
A
Overview
Date Description
Jul 2021 Initial Release
Section 1
Feb 2022
2