Chapter 2 Hardware Installation; Overview; Safety Messages; Considerations - Emerson Rosemount Reference Manual

Reference Manual
00809-0100-4145
2 Hardware installation
2.1

Overview

The information in this section covers installation considerations. A Quick Start Guide is
shipped with every device to describe basic installation and startup procedures.
Dimensional drawings for the Rosemount
Product Data
2.2

Safety messages

Procedures and instructions in this section may require special precautions to ensure the
safety of the personnel performing the operation. Information that raises potential safety
issues is indicated with a warning symbol (
before performing an operation preceded by this symbol.
WARNING
Explosions could result in death or serious injury.
Installation of device in an explosive environment must be in accordance with appropriate
local, national, and international standards, codes, and practices.
Ensure device is installed in accordance with intrinsically safe or non-incendive field
practices.
Electrical shock could cause death or serious injury.
Care must be taken during transportation of device to prevent electrostatic charge build-
up.
Process leaks could result in death or serious injury.
Handle the device carefully.
Failure to follow safe installation guidelines could result in death or serious injury.
Only qualified personnel should install the equipment.
2.3

Considerations

2.3.1 Pre-installation
Optional: power/device check
The device is designed to be installation-ready. To check device battery prior to
installation, perform the following:
Emerson.com/Rosemount
Sheet.
™
Smart Pressure Gauge can be found in the
). Refer to the following safety messages
Hardware installation
September 2019
9