Configuration Using The Fbm - Emerson Rosemount 2410 Instructions Manual

Hide thumbs Also See for Rosemount 2410:

Manual Supplement

00809-0400-2410, Rev AA

1.3

Configuration using the FBM

The Rosemount 2410 Tank Hub is configured by using the Rosemount TankMaster

WinSetup configuration program

includes basic configuration options as well as advanced configuration and service

functions.

A Tank hub with two communication boards is normally configured using an FBM

configure the tank hub for Enraf emulation, do the following:

1.3.1

Set up Modbus communication protocol

This section describes how to configure the Modbus Master protocol channel for

communication with the FBM. Specify PC communication port and the standard

communication parameters: Baud rate, Parity, and number of Stop Bits.

See the Rosemount Tank Gauging System Configuration Manual (document number 00809-0300-5100) for more information on how

to use the TankMaster WinSetup software to configure the Rosemount 2410 Tank Hub.

A tank hub where the secondary field bus communicates via WirelessHART, can be configured by wireless communication with a Smart

Wireless Gateway.

Rosemount 2410 Tank Hub

Open the Protocols folder in the Workspace window.

Select the Modbus Master icon.

Right click the proper MbMaster icon and select Properties to configure the

protocol channel.

Select the Communication tab.

(1)

. WinSetup is a user-friendly software package that

Rosemount 2410 Tank Hub

March 2016

(2)

. To

Table of Contents