Chapter 3 Configuration; Overview; Safety Messages; System Readiness - Emerson Rosemount Reference Manual

Reference Manual
00809-0100-4145
3 Configuration
3.1

Overview

This section contains information on commissioning and tasks.
Field Communicator and AMS Device Manager Instructions are given to perform
configuration functions.
Full Field Communicator menu trees are available in
3.2

Safety messages

Procedures and instructions in this section may require special precautions to ensure the
safety of the personnel performing the operation. Information that raises potential safety
issues is indicated with a warning symbol (
before performing an operation preceded by this symbol.
WARNING
Explosions could result in death or serious injury.
Installation of this device in an explosive environment must be in accordance with the
appropriate local, national, and international standards, codes, and practices. Review the
approvals section of the Rosemount
restrictions associated with a safe installation.
Before connecting a Field Communicator in an explosive atmosphere, make sure the
instruments are installed in accordance with intrinsically safe or non-incendive field wiring
practices.
Verify that the operating environment of the device is consistent with the appropriate
hazardous locations certifications.
3.3

System readiness

3.3.1 Confirm correct device driver
Verify the latest Device Description (DD/DTM
proper communications.
Procedure
1. Visit the Emerson Device Install Kits
2. Select desired product.
Emerson.com/Rosemount
a) Within Table 3-1, use the HART Universal Revision and Device Revision
numbers to find the correct Device Description.
Field Communicator menu
). Refer to the following safety messages
™
Smart Pressure Gauge Reference Manual for any
™
) is loaded on your systems to ensure
Library or Fieldcommgroup.org.
Configuration
September 2019
trees.
21