Delete A Pairing - Polar Electro M450 User Manual

4. Accept the Bluetooth pairing request on your mobile device and type in the pin code shown on
your M450.
5. Pairing completed is displayed when you are done.
or
1. On your mobile device, open Flow app and sign in with your Polar account.
2. Wait for the Connect product view to appear on your mobile device (Searching for Polar M450)
is displayed.
3. In M450 time mode, press and hold BACK.
4. Connecting to device is displayed, followed by Connecting to app.
5. Accept the Bluetooth pairing request on your mobile device and type in the pin code shown on
your M450.
6. Pairing completed is displayed when you are done.

DELETE A PAIRING

To delete a pairing with a sensor or mobile device:
1. Go to Settings > General settings > Pair and sync > Paired devices and press START.
2. Choose the device you want to remove from the list and press START.
3. Delete pairing? is displayed, choose Yes and press START.
4. Pairing deleted is displayed when you are done.
19