Danfoss VLT 2800 Manual page 41

850 Readout Transmit Error Counter
(R.OUT.TR.ERR.CO.)
Function:
This parameter is a read out of the Transmit Error
Counter of the CAN controller since the last power up.
851 Readout Receive Error Counter
(R.OUT.RE.ERR.CO.)
Function:
This parameter is a read out of the Receive Error
Counter of the CAN controller since the last power up.
852 Readout Bus Off Counter
(R.OUT.BUS.OFF.CO)
Function:
This parameter is a read out of the how many Bus Off
events there has been since the last power up.
860 Controlword
(CONTROLWORD)
Function:
This parameter is a read out of the VLT frequency
Control word. This parameter can only be read via
standard bus or DeviceNet and is not available via LCP.
861 Reference Value
(REFERENCE VALUE)
Function:
This parameter is a read out of the VLT frequency
Refence value in the range 0 - 4000 Hex. This
parameter can only be read via standard bus or
DeviceNet and is not available via LCP.
880 Statusword
(STATUSWORD)
Function:
This parameter is a read out of the VLT frequency
Status word. This parameter can only be read via
standard bus or DeviceNet and is not available via LCP.
✭
= factory setting. () = display text [] = value for use in communication via serial communication port
MG.90.B2.02 - VLT is a registered Danfoss trade mark
®
VLT 2800 / FCD 300 DeviceNet
881 Main Actual Value
(MAIN ACTUAL VAL.)
Function:
This parameter is a read out of the VLT frequency
Main Actual Value in the range of 0 - 4000 Hex.
This parameter can only be read via standard bus
or DeviceNet and is not available via LCP.
41