Creating And Editing Programs - Applied Biosystems GeneAmp PCR System 9600 User Manual

Creating and Editing Programs

The main steps involved in creating and editing programs are
summarized below. These steps are explained in detail in the
following pages.
1
2
3
4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Start at the main menu.
Choose one of the following:
a. Select CREATE on the main menu if you want to create a new
program.
b. On the next display, choose the type of program — HOLD,
CYCL, or AUTO — you want to create.
OR
a. Select EDIT on the main menu if you want to view or edit a
program you have already stored (and assigned a program
number).
View the displays in the program and make any changes to the
thermal cycling parameters.
In the last display in the program, you can choose to:
RUN Allows you to run a program that you have
customized and stored immediately. If you do not
store the program first, you will have to recreate it if
you want to use it later.
STORE Allows you to save the program you have customized
before running it. Once you have stored a program, it
may be run at any time.
PRINT Select this option to print the program you have
customized.
HOME Select this option to display the main menu.
5-9