Specifying The Number Of Cycles - Applied Biosystems GeneAmp PCR System 9600 User Manual

Specifying the Number of Cycles

The first entry in the above display specifies the number of times
the cycle will be repeated.
1
2
3-18
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Total cycles = 25
Pause during run? NO
Enter 30 cycles: press 3 then press 0. When the entry is
correct, press ENTER.
The cursor moves to the entry, "Pause during run?" This allows you
to pause a run to add a reagent to your sample solutions, for
example.
The OPTION key is also used to change a NO selection to a YES
and vice versa. The illustration below shows how this function of the
OPTION key works.
Total cycles = 25
Pause during run? NO
Total cycles = 25
Pause during run?YES
a. Press the OPTION key once
The YES option appears in place of NO.
b. For this example, no pause will be specified. Press OPTION
again to display NO, then press ENTER to accept this selection
and proceed.
Press
Option
To change NO to
YES and vice versa