Changing The Allowed Setpoint Error - Applied Biosystems GeneAmp PCR System 9600 User Manual

Changing the Allowed Setpoint Error

The allowed setpoint error is the number of degrees the actual
sample temperature may vary from the setpoint before the
reading is recorded in the history file as an error. The default
value is 2.0 degrees C. The Configuration function lets you
change the allowed setpoint error value.
To change the allowed setpoint error value:
1
2
3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Select CONFIG on the Utilities menu as described on page 7-3.
The following display appears:
Configuration
EDIT-PRINT
Press ENTER, then press STEP three times.
The following display appears:
Allowed setpt error
2.0C
The default value of 2.0 degrees C appears on this display.
To change the allowed setpoint error, press the appropriate numeric
keys, then press ENTER. The display will automatically place the
decimal point for you.
7-23