Removing/Reinstalling Front Panel; Installing The Options - Sony MFS-2000-C Installation Manual

2-2. Removing/Reinstalling Front Panel

Removal
1. Turn off the main powers of the processor and discon-
nect the AC power cords from the wall outlet.
2. Tighten the four screws (with drop-safe) and remove
the front panel.
Screws
(with drop-safe)
Front panel
Reinstallation
Insert the front panel securely into the chassis and tighten
the four screws (with drop-safe).
n
To install the front panel, fit the protrusions of the chassis
into the grooves in the front panel.
Grooves
Front panel
2-2
Screws (with drop-safe)
Protrusions
Protrusions
Grooves

2-3. Installing the Options

The MFS-2000-C is shipped from the factory with the
necessary option boards (refer to the following table)
already installed in accordance with the specified system
configuration.
The following options are available for the processor.
Option list for the processor
Model name
MKS-2110M
INPUT/OUTPUT
CONNECTOR BOARD
MKS-2420M
COLOR CORRECTOR
BOARD
MKS-2440
FRAME MEMORY
BOARD SET
MKS-2470
DME BOARD SET
HK-PSU02
POWER SUPPLY UNIT
*1
BZS-2000M
SWITCHER UPGRADE
SOFTWARE
*1
BZS-2440M
FRAME MEMORY
UPGRADE SOFTWARE
BZS-2470M *1
DME UPGRADE SOFTWARE
*1 : BZS-2000M, BZS-2440M and BZS-2470M are the software options.
*2 : The CC-95 board is the option board to install on the MY-112 board.
Board configuration
Plug-in board Connector board
_ CN-2486 board
(CC-95 board *2 ) _
MY-112 board CN-2535 board
DVP-30 board _
CA-54CFB board
_ _
_ _
_ _
_ _
MFS-2000 IM