Location And Function Of Parts; Front Panel - Sony MVS-8000G-C Operational Manual

Location and Function of Parts

Front Panel

MVS-8000G
POWER A, B, C, D switches and status indicators
MVS-8000GSF
POWER A, B switches and status indicators
POWER A, B, C, D switches and status indicators
The POWER switches turn the unit on and off. The unit is
powered on when the POWER switches are on the " ? "
side, and powered off when the POWER switches are on
the "a" side. The status indicators light in green when the
unit is powered on.
• MVS-8000G
Depending on the configuration of your unit when
shipped, the HK-PSU04 Power Supply Unit may not be
installed. In this case, only the POWER A and POWER B
switches are available. There is no POWER C or POWER
D switch.
The unit does not operate until two of the four power
switches (A, B, C and D) are on.
When the HK-PSU04 are installed, operation continues as
long as two power supplies are normal.
• MVS-8000GSF
Depending on the configuration of your unit when
shipped, the HK-PSU04 Power Supply Unit may not be
10
Location and Function of Parts
installed. In this case, only the POWER A switch is
available. There is no POWER B switch. The unit does not
operate until either of the two power switches (A and B) is
on.
When the HK-PSU04 is installed, operation continues as
long as one power supply is normal.
Notes
• When installing the HK-PSU04 in your unit, be sure to
contact your Sony service representative.
• If a status indicator does not light when you turn a
POWER switch on, there may be a fault in the power
circuits. Turn the POWER switch off and contact your
Sony service representative.