Location And Function Of Parts; Front Panel - Sony MVS-8400 Operation Manual

Location and Function of Parts

Front Panel

Power A, B, C, D switches and status indicators
Power A, B, C, D switches and status indicators
The POWER switches turn the unit on and off. The unit is
powered on when the POWER switches are on the " ? "
side, and powered off when the POWER switches are on
the "a" side. The status indicators light in green when the
unit is powered on.
Depending on the configuration of your unit, the HK-
PSU04 Power Supply Unit may not be installed. In this
case, only the POWER A, B, C switches are available.
There is no POWER D switch.
The unit does not operate until three (A, B, C) of the four
(A, B, C, D) power switches are on.
Installation of the HK-PSU04 Power Supply Unit allows
operation to continue normally even if one of the four
power supplies fails.
Caution
When installing the HK-PSU04 in your unit, be sure to
contact your Sony service representative.
Note
8
Location and Function of Parts
POWER A
POWER B
POWER C
POWER D
Note
If a status indicator does not light when you turn a POWER
switch on, there may be a fault in the power circuits. Turn
the POWER switch off and contact your Sony service
representative.