Sony MFS-2000-C Installation Manual page 33

<Switch>
S1601 (A-9) : MONITOR reset switch
Used for maintenance purpose.
This is a reset switch used in maintaining through the
terminal pin (CN1602).
S1701 (A-9) : XPT-CPU reset switch
Pressing this switch initializes the CPU on the XPT-24
board.
<Slit land>
SL1100, SL1101, SL1102 (B-6) : JTAG chain
switching
They are the slit lands that are used to switch the JTAG
chains.
Connect these slit lands to open or to close them so that the
following statuses can be obtained.
SL1101 SL1100 SL1102
short short open
short open short
<LED on the CPU-DK module>
Refer to <LED on the CPU-DK module> in "1. CA-54
board".
<Switch on the CPU-DK module>
Refer to <Switch on the CPU-DK module> in "1. CA-54
board".
MFS-2000 IM
Status
The chain of CPLD only is
established.
All of the JTAG devices are
connected in chain.
2-23