Location And Function Of Parts; Mfs-2000 Front Panel - Sony MFS-2000-C Operation Manual

Location and Function of Parts

MFS-2000 Front Panel

POWER A, B and C switches and status indicators
The POWER switches turn the unit on and off. The unit is
powered on when the POWER switches are on the "?" side,
and powered off when the POWER switches are on the
"a" side. The status indicators light in green when the unit
is powered on.
Depending on the system's configuration when shipped,
there may be no optional HK-PSU02 Power Supply Units
installed. In this case, the only available POWER switches
are A and B (there is no switch C).
The unit is not powered on until two of the POWER
switches (A, B and C) are turned on.
With HK-PSU02 units installed, the system continues to
function normally as long as any two of the power supply
units are operating normally.
Caution
When installing the HK-PSU02 in your unit, be sure to
contact your Sony service representative.
Note
If a status indicator does not light when you turn a POWER
switch on, there may be a fault in the power circuits. Turn
the POWER switch off and contact your Sony service
representative.
8
Location and Function of Parts
POWER A
POWER B
POWER C
Power A, B, C switches and status indicator