Installing Connector Board; Installing Hk-Psu02; Installing Bzs-2000M/2440M/2470M - Sony MFS-2000-C Installation Manual

2-3-2. Installing Connector Board

1. Remove the two screws and remove the blank panel.
m
. To install the connector board into the slot in which
the other board is installed already, loosen the two
fixing screws and remove the connector board
installed already.
. Store the removed blank panel in a safe place.
2. Insert the connector board horizontally level and
secure it with the two fixing screws.
Option model name Board name
MKS-2110M CN-2486 board
MKS-2440 CN-2535 board
2-4
B3 x 5
Blank panel
B3 x 5
Fixing screw
Connector board
Fixing screw
Installation slot
(rear side)
5
6

2-3-3. Installing HK-PSU02

The HK-PSU02 is used in the processor.
c
Before installing an HK-PSU02 in processor, set the
POWER switch of the HK-PSU02 to the "O" position
(OFF).
1. Turn off the main powers of the processor and discon-
nect the AC power cords from the outlet.
2. Remove the front panel. (Refer to Section 2-2.)
3. Remove the two screws that secure the blank panel
and remove the blank panel.
PSW3 x 6
Blank panel
n
Store the removed blank panel in a safe place.
4. Insert the HK-PSU02 securely into the deep end.
5. Secure the HK-PSU02 with the two screws, which are
removed in the step 3.
PSW3 x 6
6. Reinstall the front panel.

2-3-4. Installing BZS-2000M/2440M/2470M

For the installation procedure of the software options BZS-
2000M/2440M/2470M, refer to the MFS-2000 System
User's Guide.
MFS-2000 IM