Constant-Speed Torque Limiting Time; Width Of Arrive Of Frequency In Hqsteretic Loop; Jump Frequency 1; Jump Frequency 2 - Janson Controls FC100 Series Manual

Chapter 6 Description of parameter setting
P429

Constant-speed torque limiting time

Setting Range:0~999.9S
P430

Width of arrive of frequency in hqsteretic loop

Setting Range:0~2.00S
This parameter sets frequency reached width, for details, refer to P425-F426
introductions
P431

Jump Frequency 1

Setting Range:0~frequency upper limit
P432

Jump Frequency 2

Setting Range:0~frequency upper limit
P433
Jump frequency hysteresis loop width
Setting Range:0~2.0
If machine resonance occurred at a certain frequency, we can use the
frequency jump function to skip the resonance point. t!20OtJ support 2 jump
6
frequencies by parameter P431 and P432.
Frequency jump hysteresis loop width can be set through P433 as below:
Unit:0.1
Unit:0.1
78
FC100 Series User Manaul
Default value 0.5
Unit:0.1
Default value 0 .5
Unit:0.1
Default value 0
Default value 0
Default value 0.5
Unit:0.1