Automatic Energy-Saving Selection; Restart After Instant Power Off - Janson Controls FC100 Series Manual

Chapter 6 Description of parameter setting
P413

Automatic energy-saving selection

Setting Range:0~100
P413 Automatic energy-saving selection
In constant-speed running of automatic energy-saving selection, best voltage
value may be calculated by loading condition and provided to load, in order to
achieve best energy-saving.
Attention: for running that load changes frequently or is almost at full load, this
function is not suitable.
6
P416

Restart after instant power off

Setting Range:0~1
Explanation:
0: Invalid
Inverter clears the running command after power failure. After power is
recovered, inverter will not start automatically.
1: Frequency tracing enable
When power is shut-off in short time, inverter keeps the running command as
effective. When power is recovered in time, inverter will tracing the motor speed
and resume output.
Attention: when instant power failure restarting is enabled, inverter may start
the motor automatically. Please take care of the safety when use this function.
0: Invalid: no restart after instant power failure
1: Valid: frequency tracing start-up
74
FC100 Series User Manaul
Default value 0.0
Unit:1
F
Default value 0.0
Unit:1