General Description
2
An ANSI/BHMA Grade 1 lock utilizing Power over Ethernet (PoE) technology, the Passport 1000 P1
provides a cost-effective, future-proof solution for campuses. Featuring multiCLASS SE
HID Global
, it provides simultaneous support for multiple credentials and offers an easy migration path
®
to higher security credentials and mobile access. Recognized for its contribution to sustainable buildings,
the P1 re-uses existing IEEE 802.3af PoE infrastructure, streamlines the installation process, reduces costs
and components, and minimizes power consumption.
Hardware Specifications
3
•
Complete locksets with controller
•
ADA Compliant
•
Easily retrofits existing Passport 1000
door preps (mortise locks)
•
Latch 1/2" standard 3/4" throw fire-rated
double doors (optional) (41- prefix)
•
Deadlocking latch
•
Inside lever retracts latch
Electronic Specifications
4
• HID
multiCLASS SE
®
support for the following credentials:
•
2.4 GHz credential compatibility:
•
Secure Identity Object
Mobile IDs (Bluetooth Smart)
•
13.56 MHz credential compatibility:
•
iCLASS
•
iCLASS SE
•
iCLASS Seos
•
SIO on MIFARE
•
SIO on MIFARE
•
MIFARE
•
DESfire
•
NFC-enabled mobile phones
•
125 kHz credential compatibilty:
•
HID Prox
•
Magnetic Stripe
4
1-800-810-WIRE • www.sargentlock.com • A8032G
technology offers
®
(SIO) on
™
®
(SIO-enabled)
®
®
Classic
®
DESfire
EV1
®
®
Classic
®
EV1
®
®
Passport 1000 P1 PoE Mortise Lock
• ANSI/BHMA A156.25 Listed Grade 1 Compliant
• Outside lever is unlocked through access
control credentials only
• Outside lever controlled by any combination of
keypad, magnetic swipe, contactless reader or
mechanical cylinder
• May be used for indoor and outdoor applications
NOTE: A weather-protective gasket is required
for outdoor applications.
•
2,400 users per lock; 10,000 event audit trail
•
Multiple time zone and holiday access scheduling
•
First-In unlock configuration, based on specified
time schedule
•
Uses existing Magstripe keycards (track 2)
•
Magnetic Stripe Card Coercivity: HiCo (4000
Oersted) or LoCo (300 Oersted)
•
Power Requirements: 55VDC, 90mA
•
PoE Class
1
Device, as defined by IEEE
802.3af, requires less than 3.84 watts over
structured cabling
• UL Listed* - UL 294 Indoor Use
• CUL Listed - S319: Class 1
• UL 294 Access Control Ratings:
Destructive Attack
Line Security
Endurance
Standby Power
*UL testing was conducted on product powered by
UL Listed model 9001GR/AC injector; manufactured
by Microsemi Corp.
Technology from
®
Level 1
Level 1
Level 4
Level 1