Table of Contents
Advertisement
SE LP10 Integrated Wiegand
With and Without MELR Option (Electric Latch Retraction)
The Corbin Russwin SE LP10 brings a new level of flexibility to our Integrated Wiegand access control solutions
for MP9800 series multipoint locks. Featuring multiCLASS SE® Technology from HID Global®, the SE LP10 is
ideal for mixed credential environments and enables easy migration to higher security credentials and mobile
access. SE LP10 multipoint locks include an external Door Position Switch (DPS) for door position monitoring
and other monitoring options, such as latchbolt and lever monitoring, are available as add-ons. The SE LP10
reader provides visual (LED) and audible indicators of lock state (locked/unlocked).
Hardware Specifications
3
All SE LP10 Multi Point Locks
• Fire rated devices available
• Multi point lock furnished for 1-3/4" doors
• Fail safe or fail secure available
• Door Position Switch (708F989) supplied
for monitoring
• 24VDC motor-operated ET Trim available
• Wire from EAC Panel to door must be
shielded with a drain terminated at EAC
Panel controller
SE LP10 MP9800 Series Multi Point Lock
• Cylinder override available for MP9800 with
Auxiliary Control
SE LP10 - MELR
12VDC System (MELR)
•
Reader Draw = 200mA
(Reader is always 12VDC)
•
12VDC MELR Module Draw = 850mA
•
Total System Draw = 1050mA
Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), CSA 22.1, Canadian Electrical
Code (CEC), Part I, Safety Standard for Electrical Installations, local codes, and the authorities having jurisdiction.
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
2) General Description
3) Hardware Specifications
• Outside lever can be controlled by multiple credential formats:
• 2.4 GHz credential compatibility
• Secure Identity Object
(Bluetooth Smart)
• 13.56 MHz credential compatibility:
• Secure Identity Object™ (SIO) on iCLASS Seos,
iCLASS SE/SR, MIFARE DESFire EV1 and MIFARE Classic
(on by default)
• Standard iCLASS Access Control Application, ISO14443A
(MIFARE) CSN, ISO14443B CSN, and ISO15693 CSN
• ISO14443A/B (PIV-compatible Transparent FASC-N read)
available with SE LP10-F
• NFC-enabled mobile phones
• 125 kHz credential compatibilty:
• HID Prox
4) Electronic Specifications
4
(SIO) on Mobile IDs
™
, AWID, EM4102
®
SE LP10 Non - MELR
12VDC / 24 VDC System (Non-MELR)
•
Reader Draw = 150mA
•
Actuator Draw = 400mA
•
Total System Draw = 550mA
Advertisement
Table of Contents
