Assa Abloy Sargent PASSPORT 1000 P1 Installation Instructions Manual page 14

4 Outside Cylinder Installation
1. Slide the spring and the rosette onto the cylinder.
2. Rotate the cylinder into cylinder hole with fingers.
3. Insert key 75% of the way and utilize the key to rotate the cylinder
into the rest of the cylinder hole.
Note: Do not attempt to tighten all the way.
4. Verify that orientation of cylinder has the SARGENT logo as depicted
in Fig. 4A.
5. Hand tighten the cylinder clamp screw with Phillips screwdriver to
prevent unscrewing of the cylinder (Fig 4C).
6. Test cylinder function:
• Key retracts latchbolt and deadbolt (7976 function)
• Key retracts latchbolt (7978 function)
• Cylinder not present for 7977 and 7979 functions
Rosette
Spring
Cylinder
14 1-800-810-WIRE • www.sargentlock.com • A8032G
Passport 1000 P1 PoE Mortise Lock
Outside of Door
Fig. 4B
IMPORTANT: Position cylinder so that the
SARGENT logo is positioned correctly.
Correct
Fig. 4A
Fig. 4C
Incorrect
Phillips
Screwdriver
Cylinder
Clamp Screw