Assa Abloy Sargent PASSPORT 1000 P1 Installation Instructions Manual page 15

Passport 1000 P1 PoE Mortise Lock
5 Assemble Outside Trim
1. With outside lever horizontal, insert the mounting posts through outside of door and lock body.
Make certain the lever spindle is properly engaged inside the lock body (Fig 5A).
2. On the inside of the door, insert spindle into square hole of mortise lock (Fig 5B).
3. Slide inside adapter and plate assembly over spindle and secure with (2) 8-32 X 5/8" Phillips
oval head and lock washer machine screws.
Note: Ensure that position of set screw hole on inside adapter is oriented to match location of hole in
inside lever handle.
Outside of Door
Outside Trim
Fig. 5A Detail
Spindle
Outside Trim
Fig. 5A
Spindle
Fig. 5B
1-800-810-WIRE • www.sargentlock.com • A8032G
Inside of Door
Ground Wire
Wire Harness
(From Lock Body)
Set Screw Hole
15