Assa Abloy Sargent PASSPORT 1000 P1 Installation Instructions Manual page 16

6 Install Inside Rose and Inside Lever Assembly
1. Place inside rose flush against door surface and rotate
first counter-clockwise to seat the threads, then clockwise
to securely tighten.
2. Slide lever onto spindle until fully seated. Be sure handle
is horizontal and facing the hinge side of the door.
Push lever onto spindle so minimum gap is visible.
3. Tighten the set screw securely with a T20 Torx
4. Finish securely tightening (2) #12-24 lock body screws.
5. Before closing the door, test that the lever is functional
and ensure smooth operation of the latchbolt.
7 Install Thumb Turn
1. Insert thumb turn into preparation hole and engage slot
in lock body.
2. Orient mounting plate so screw hole is vertical (aligned
with preparation holes).
3. Secure plate with Phillips screw provided (Fig. 7).
4. Test thumb turn for function by retracting and projecting
the deadbolt (7976 and 7977 functions only).
16 1-800-810-WIRE • www.sargentlock.com • A8032G
Passport 1000 P1 PoE Mortise Lock
driver.
®
#12-24 screws
Fig. 6
Thumb Turn
Assembly
Fig. 7
Inside of Door
Rose
Spindle
Inside
Lever
Set Screw
Inside of Door