Table of Contents
Advertisement
Brightness Level setting
90%
80%
70%
60%
50%
40%
30%
Note: The light source usage hours vary depending upon environmental conditions and usage. The
hours listed here are an approximate and are not guaranteed. After 20000 hours of use, you may need to
replace parts in the projector. If Constant Brightness is turned on, and you have exceeded the usage
hours listed here, you may not be able to select a high Brightness Level setting.
Parent topic:
Turning On Automatic Luminance Adjustment
In the Dynamic and Cinema color modes, you can turn on the Dynamic Contrast setting to
automatically optimize the image luminance. This improves the image contrast based on the brightness
of the content you project.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.
Hours
6000 hours
10000 hours
19000 hours
29000 hours
41000 hours
56000 hours
78000 hours
Adjusting the Brightness
141
Advertisement
Table of Contents
