Rra; Acma - Siemens RUGGEDCOM RSG920P Installation Manual

RUGGEDCOM RSG920P
Installation Guide
Section 6.1.8

RRA

This device has been registered by the Korean Radio Research Agency (RRA) under Clause 3, Article 58-2 of the
Radio Waves Act. As such, the device is marked with a KC symbol and can be used in the Republic of Korea (South
Korea) as a Class A product in a commercial, industrial or business environment.
A copy of the KC Declaration of Conformity is available from Siemens Canada Ltd. For contact information, refer to
"Contacting Siemens".
Notices specific to the RRA:
WARNING!
Class A Equipment (Industrial Broadcasting and Communication Equipment)
This device complies with the limits of a Class A electromagnetic wave device and is intended for use
outside of a residential environment. The seller or user must be aware.
주의!
A급 기기 (업무용 방송통신기자재)
이 기기는 업무용(A급) 전자파적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라며, 가정외의
지역에서 사용하는 것을 목적으로 합니다.
Section 6.1.9

ACMA

This device meets the requirements of the following Australian Communications and Media Authority (ACMA)
standards under certificate ABN 98 004 347 880:
• Radiocommunications (Compliance Labelling – Devices) Notice 2014 made under Section 182 of the
Radiocommunications Act 1992
• Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2008 made under Section 182 of the
Radiocommunications Act 1992
• Radiocommunications (Compliance Labelling – Electromagnetic Radiation) Notice 2003 made under Section
182 of the Radiocommunications Act 1992
• Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001 made under Section
407 of the Telecommunication Act 1997
The device is marked with an RCM symbol to indicate compliance when sold in the Australian region.
A copy of the Declaration of Conformity is available via Siemens Industry Online Support at
support.industry.siemens.com/cs/ww/en/view/89855782.
RRA
MSIP-REM-S14-RSG920P
Chapter 6
Certification
https://
39