Rohs; Other Approvals; Emc And Environmental Type Tests - Siemens RUGGEDCOM RSG920P Installation Manual

Chapter 6
Certification
Section 6.1.10

RoHS

This device is declared by Siemens Canada Ltd to meet the requirements of the following RoHS (Restriction of
Hazardous Substances) directives for the restricted use of certain hazardous substances in electrical and electronic
equipment:
• China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic Information Products
A copy of the Material Declaration is available online at
view/109738831.
Section 6.1.11

Other Approvals

This device meets the requirements of the following additional standards:
• IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric
Power Substations
• IEC 61850-3
General Requirements
• IEC 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity for Industrial Environments
• NEMA TS-2
Traffic Controller Assemblies with NTCIP Requirements
• EN 50121-4
Railway Applications – Electromagnetic Compatibility – Emission and Immunity of the Signaling and
Telecommunications Apparatus
• EN 50121-3-2
Railway Applications – Electromagnetic Compatibility – Rolling Stock – Apparatus
• EN 45545-2
Railway Applications – Fire Protection on Railway Vehicles – Requirements for fire Behavior of Materials and
Components
Section 6.2

EMC and Environmental Type Tests

The RUGGEDCOM RSG920P has passed the following Electromagnetic Compatibility (EMC) and environmental
tests.
EMC Type Tests per IEC 61850-3
Test
IEC 61000-4-2
40
Description
Electrostatic Discharge (ESD)
https://support.industry.siemens.com/cs/ww/en/
Enclosure Contact
RUGGEDCOM RSG920P
Installation Guide
Test Levels Severity Levels
±8 kV 4
RoHS