Siemens RUGGEDCOM RSG920P Installation Manual page 32

Chapter 3
Device Management
Figure 16: Inserting/Removing a MicroSD Card
1. MicroSD Card 2. Access Plate
2. When removing the card, first press the card in until it springs back.
3. Without touching the contacts on the card, insert or remove the microSD card.
4. When installing the card, push the card in until it clicks in place.
5. Install the access plate and tighten the retention screw.
6. Power up the device.
22
1
Inserting/Removing the MicroSD Card
RUGGEDCOM RSG920P
Installation Guide
2