Table of Contents
Advertisement
To install the Z9332F-ON switch, complete the installation procedures in the order presented in this section.
Always handle the switch and its components with care. Avoid dropping the switch or any field replaceable units (FRUs).
NOTE:
ESD damage can occur if components are mishandled. Always wear an ESD-preventive wrist or heel ground strap
when handling the switch and its components. As with all electrical devices of this type, take all the necessary safety
precautions to prevent injury when installing this switch.
Topics:
•
Unpack
•
Ground cable
•
Rack or cabinet installation
•
Z9332F-ON switch installation
•
Optics installation
•
Switch power-up
•
After switch installation
Unpack
NOTE:
Before unpacking the switch, inspect the container and immediately report any evidence of damage.
When unpacking the switch, ensure that the following items are included:
•
One Z9332F-ON switch
•
Two sets of rail kits, no tools needed
•
One RJ-45 to DB-9 female cable
•
Two hot-swappable PSUs
•
Seven hot-swappable fan units
•
Two country- and region-specific AC power cables
•
Dell EMC PowerSwitch Z9332F-ON Set-up Guide
•
Safety and Regulatory Information
•
Warranty and Support Information
1. Place the container on a clean, flat surface and cut all straps securing the container.
2. Open the container, or remove the container top.
3. Carefully remove the switch from the container and place it on a secure and clean surface.
4. Remove all packing material.
5. Inspect the product and accessories for damage.
Ground cable
To attach a ground cable to the switch, use the included M4 screws.
NOTE:
For an AC-powered switch, although the third conductor of the AC power cable provides a ground path, Dell
EMC recommends grounding your switch with a dedicated ground wire.
The ground cable and ground lug are not included. The grounding lugs must be a UL-recognized, crimp-type lug.
CAUTION:
Grounding conductors
8
Z9332F-ON Installation
Z9332F-ON Installation
must be made of copper. Do not use aluminum conductors.
3
Advertisement
Table of Contents
