Adding The Granules - Rinnai Evolve 952 Series Installation Manual

9. Far LHS small log (1252 model only)
Fit the far small left hand log onto the two locator
brackets.
9

Adding the granules

• Evolve 952:
• Evolve 1252:
Adding the granules
The granules as well as being added to create a more realistic log flame affect (by diffusing the
gas flames through the burner ports) also assist in soot prevention and are CRITICAL to the
performance of the heater. Never pour the granules directly from the pack as dust particles from
the plastic bag may block the ports.
DO NOT place the granules near the flame rods or the pilot (areas highlighted in the image below)
as this will cause a blockage and the unit will not start.
Place the granules evenly (do not stack) around the logs in the front part of the burner and on the
middle section of the burner (in the gaps between the logs)—refer fully assembled image.
20 | Evolve 952/1252 Installation Guide: 13115-E 05-19
Two granule packs
Three granule packs
10. Far RHS small log (1252 model only)
Fit the far small right hand log onto the two locator
brackets.
10