Rinnai Evolve 952 Series Installation Manual page 23

Evolve 1252
L1
CO
1. From the stone set box identify the five front grey
cutout stones and place these on the burner brackets
at the front as shown below.
3. Start placing the remaining stones on the burner,
starting at the front—10 stones (identified with a dot).
5. Place the remaining 5 grey stones ((identified with
a dot) through the middle section of the burner. You
may need to tweak the position of the other stones for
them to fit and sit properly.
L2 L3
L4
CO CO
L5
L6
CO CO
2. From the stone set box identify the eight L1-L8
large grey stones and place them on the burner as
shown in the above and below images.
4. Place remaining grey stones on the back section of
the burner—12 stones (identified with a dot).
6.
Add the granules
Refer step 8 on previous page.
Evolve 952/1252 Installation Guide: 13115-E 05-19 | 23
L7 L8