Gateway; Main Features - Siemens AlgoRex CS1140 Planning

Gateway

29 Gateway
29.1

Main features

CT11
C-BUS
CC11
I-BUS
CI11
Line-
Note:
Select corresponding protocol depending on application.
Assign the DMS network address to CC/CI and CK (via program-
ming in AlgoWorks)
For valid DMS network address, see document 004075
83
82
Building Technologies
Fire Safety & Security Products
C bus network <–> DMS / LMS connection via V28 interface (RS232)

Conversion C bus <–> CERLOOP/CERBAN/ISO1745

For bridging distances of up to 1000 m (double V28 modem integrated)

For distances > 1000 m, use FSK/PSK modem

Several gateways are possible per C bus network, see section 8

Is preferably accommodated in a housing of a fire control panel

Can also be operated autonomously with separate supply (E3C011 + B2F020 +

batteries)
Extra hardware is needed for the connection to the CERLOOP network

(K1H022, K1D081 or K1D121)
Extra hardware is needed for the connection to the NK8000 network (NK823x.2,

NKA8011-A1, NZ8201)
Check according to outline quantities section 9.3

CT11
CK1143
Control- module
Detector
CERLOOP/
CERBAN/
ISO1745
DMS/LMS
DMS8000
Installation of modem filter
under network terminals
–> see installation example on page
CERLOOP (V28)
E3H021
K1H022
K1D081
M3P030
CERLOOP (FSK)
E3H021
K1H022
K1D121
CERBAN (V28)
E3H021
CERBAN (FSK)
E3H021
K1D140
NK8000 (Ethernet)
E3H021
NK823x.2
NKA8011-A1
NZ8201
008725_h_en_--
06.2011