Appendix A: Specifications; Panel Specification; Remote Keypad Specification - Honeywell Ademco Accord Installation Instructions Manual

APPENDIX A: SPECIFICATIONS

Panel Specification

Physical Width:
Height:
Depth:
Electrical Mains Input:
Stand-by Battery:
Current Drain (control only):
External Sounder Output:
Strobe output:
Aux Power Output:
Trigger Output:
Fuses Mains:
Battery:
Speaker/Strobe:
Keypad/Aux Power:
Note: Due to continued product development and improvements these specifications
may change without notice.

Remote Keypad Specification

• Connected via a three wire terminal block on the back of the keypad
• Built in piezo warning sounder
Physical
Electrical
Width:
Height:
Depth:
Voltage Input:
Current Drain:
195
285
90 mm
230 V a.c. (+10% -8%) 50 Hz
Up to 7.2 Ahr 12 V Sealed Lead-Acid
30 mA (normal use)
12 V – 1 A max Switched –ve
12 V – 500 mA max Switched –ve
12 V – 500 mA max
12 V – 5 mA max (Normally 0 V)
100 mA (IEC 127) 20 mm
2 A – 20 mm Anti-surge (F1)
500 mA – 20 mm Anti-surge (F2)
500 mA – 20 mm Anti-surge (F3)
120 mm
120 mm
25 mm
12 V d.c.
42 mA (normal use)
77 mA (worst case)
29
mm
mm