Table of Contents
Advertisement
Group 4 — Option 1 Exit Time
This is the amount of time that the user has to exit the premises after the setting
procedure has been initiated. Entering 411 will set the Exit Time to 10 seconds, 412
= 20 seconds, 413 = 30 seconds, etc. — up to 419 = 90 seconds.
If final contact set is required, enter 410. This gives infinite Exit Time. The system
will only set when a Final Exit zone is closed after the exit timer has started.
Note: Exit Times for Part Set and Night Set are fixed at 30 seconds.
Group 4 — Option 2 Entry Time
This is the amount of time that the user has to enter the premises and unset the
system. Entering 421 will set the Entry Time to 10 seconds, 422 = 20 seconds, etc.
— up to 429 = 90 seconds.
Note: Entry Times for Part Set and Night Set are fixed at 30 seconds.
Group 4 — Option 3 Bell Cut-off Time
This is the amount of time that the sounders/bells activate after an alarm condition
has occurred. To programme the Bell Cut-off Time enter 43 then a number 0 — 9,
see Table 3.5 Bell Cut-off Times.
Note: Once the Bell Cut-off Time has expired the system will reset. Each zone is
allowed to cause an alarm condition twice during one set period. After this
the zone is automatically isolated.
Group 4 — Option 4 Part Set Exit Warning
This option allows the Part Set exit timer to be silent, audible through the keypad, or,
audible through the keypad and internal sounder. Night Set will always have a silent
exit timer but this option will affect the Night Set comfort tone (confirmation of set)
and fault warnings given at the end of the Exit Time; Tables 3.6 to 3.8 show all
possible options.
B
e
l l
C
t u
o -
f f
i T
m
0
=
C
n o
n i t
o u
s u
B
e
1
=
1
i m
u n
e t
2
=
2
m
n i
t u
s e
3
=
3
m
n i
t u
s e
4
=
4
m
n i
t u
s e
5
=
5
m
n i
t u
s e
6
=
0 1
m
n i
t u
s e
7
=
5 1
m
n i
t u
s e
8
=
0 2
m
n i
t u
s e
9
=
0 3
m
n i
t u
s e
Table 3.5 Bell Cut-off Times.
15
e
s
s l l
Hide quick links:
Advertisement
Table of Contents
