Avaya J139 Manual page 59

Name
Alert click to dial calls
Alert group paging calls
Use mobility calling line ID
BroadWorks call control
Use diversion inhibitor
Answer confirmation required
Device to ring
Include shared call appearance
Include BroadWorks Anywhere
Include executive assistant
Mobile identities alerted
October 2019 Using Avaya J139 IP Phone in an Open SIP environment
Comments on this document? infodev@avaya.com
Description
Specifies that the mobile is alerted for a click to dial
call.
Specifies that the mobile is alerted for group paging
call.
Specifies that the mobile number is used as the
calling line identity when a call is made from this
mobile device.
Specifies that the call control is with the
BroadWorks and not with the mobile device.
Specifies that the call is not redirected for an
unanswered call.
Specifies that a confirmation digit is required after a
mobile call leg is answered.
Specifies that the device must ring when the phone
number gets a call.
Use the Right Arrow or Left Arrow key to select
one of the following:
• Fixed: To set the office phone or fixed devices to
ring when the phone number gets a call.
You can select SCA, BroadWorks Anywhere, and
executive location for fixed.
• Mobile: To set the mobile phone to ring when the
phone number gets a call.
• Both: To set both the mobile phone and the fixed
device to ring when the phone number gets a call.
Specifies that all SCA devices are alerted.
Ensure to set Device to ring to either Fixed or
Both.
Specifies that all BroadWorks Anywhere locations
are alerted.
Ensure to set Device to ring to either Fixed or
Both.
Specifies that all executive assistant locations are
alerted.
Ensure to set Device to ring to either Fixed or
Both.
Specifies the list of mobile identities that are alerted.
Advanced features
59