Adding A Person On Hold To A Conference Call; Putting A Conference Call On Hold And Resuming A Call - Avaya J139 Manual

Call related features
3. When the third participant answers the call, press the Join soft key.
4. To add another person, press Add and repeat Steps 2 and 3.

Adding a person on hold to a conference call

About this task
You can add a held call to a conference call.
Procedure
1. On the Phone screen, select your active call.
2. Press Conf or Add button if you are already in a conference.
3. Press Held call soft key to see a list of held calls.
4. Select the call on hold that you want to add to the conference.
5. Press one of the following:
• Join
• Conf
The held call is added to the conference call.

Putting a conference call on hold and resuming a call

About this task
Use this procedure to put a conference participant on hold, while other participants continue the
conference call.
Procedure
1. Press Hold soft key during a conference call.
2. Do one of the following:
• Press Resume.
• Select the call appearance to resume the conference call.
October 2019 Using Avaya J139 IP Phone in an Open SIP environment
Comments on this document? infodev@avaya.com
42