In Case Of Damage; Connecting The Unit; Connection Of External Equipment - Dentsply Sirona CEREC SpeedFire Operating Instructions Manual

2 Safety instructions

2.2 Connecting the unit

14
2.1.5

In case of damage

In case of noticeable malfunctions or damage, stop using the instrument
immediately and notify your authorized dealer or the manufacturer.
Connecting the unit
2.2
Perform connection by following the directions given in the present
operating instructions.

Connection of external equipment

2.3
If any equipment not approved by Sirona is connected, it must comply
with the applicable standards:
● EN 60 950 for information technology equipment, and
● EN 61 010-1 for laboratory equipment.
Dentsply Sirona
Operating Instructions CEREC SpeedFire
65 71 165 D3639
D3639.201.01.08.02 01.2020