Cockpit - Maxxus 8.1 Operating Manual And Assembly Manual

Cockpit

Free Memory Space U01, U02 and U03
Here there are 3 free memory slots for individual training profiles.
Step 1: Program Selection
After switching the treadmill on „P0" will appear on the display. Select the memory slot you want from U01, U02 or U03
using the "P" key.
Step 2 2: Time Input
The value of 30:00 minutes will be flashing in the TIME display. Enter the training time you require between 05:00 and
99:00 by pressing the control key for speed or incline.
Step 3: Selecting the Speed
In the profile matrix the first of the 16 segments will flash and the value of 1.km will be flashing in the SPEED display.
Enter the required speed by pressing the control key for speed or using the quick selection key QUICK SPEED.
Confirm your entry by pressing the MODE key.
Now the second segment in the profile matrix will be flashing and the value of 1.0 km/h will flash in the SPEED display.
Enter the speed you require as instructed above and confirm this with the M key and proceed in the same way with
the rest of the segments.
Step 4: Selecting the Incline
After confirming your required speed for the last segment by pressing the M key, the segments and Value 1 will start to
flash in the profile matrix to select the incline.
Enter the required incline by pressing the control key for incline or by using the quick selection key QUICK
INCLINE.
Confirm your entry by pressing the MODE key.
Now the second segment in the profile matrix will be flashing and Value 1 will be flashing in the incline display. Enter
the incline you require and confirm this by pressing the M key. Proceed in the same way with the rest of the
segments. When you have completed the entry for the last segment, do not press the M key but continue straight
away with Step 5.
Step 5: Program Start
Now press the START key.
A countdown will be shown in the display. The training time will start to run as soon as the countdown ends,
and the treadmill will start automatically.
Training End
The treadmill stops automatically at the end of the selected time.
The training profile has now been saved in the memory. To do this training again, follow Step 1 and Step 1. Directly
after entering the time, press the START key.
To overwrite the program simply follow all the steps above.
19