HP 3500yl Series Access Security Manual page 328

Configuring RADIUS Server Support for Switch Services
RADIUS Server Configuration for CoS (802.1p Priority) and Rate-Limiting
HP Switch
# show rate-limit all 1-5
All-Traffic Rate Limit Maximum %
| Inbound
Port | Limit
----- + --------- --------- ----------- + --------- --------- -----------
1 | Disabled
2 | Disabled
3 | 1000
4 | 50
5 | 50
Ports 3 - 5 have CLI-configured inbound per-port
rate-limits and clients with RADIUS-assigned
inbound per-client rate-limits. (To see the per-
client RADIUS settings, use the command
illustrated in figure 7-1.)
Figure 7-2. Example of Displaying Rate-Limiting for Multiple Ports (CLI and RADIUS)
HP Switch
# show qos port-priority
Port priorities
Port Apply rule
---- ----------- + ------ ----------- ---------------
1 No-override |
2 No-override |
3 No-override |
4 Priority
5 No-override |
Port 4 has CLI-configured per-port priority and a client with a RADIUS-
assigned priority. (To see the RADIUS-assigned per-client priority
settings, use the command illustrated in figure 7-1.)
Figure 7-3. Example of Displaying Priority for Multiple Ports (CLI and RADIUS)
7-10
Syntax: show rate-limit all [port-list ]
show qos port-priority
These commands show the CLI-configured rate-limiting and
port priority for the selected ports. They also include
indications of RADIUS-assigned rate-limiting and client
traffic priority settings for any clients that may be
authenticated on the same ports.
Radius
Mode Override
Disabled No-override | Disabled
Disabled No-override | Disabled
kbps Override
% Override
% No-override | 50
| DSCP Priority
No-override No-override
No-override No-override
No-override No-override
| 7
No-override No-override
| Outbound
| Limit Mode
Disabled
Disabled
| 1000 kbps
| 50 %
%
Ports 3 - 5 also have CLI-configured outbound per-
port rate-limits and clients with RADIUS-assigned
outbound (per-port) rate-limits.
Radius Override
Override
Radius
Override
No-override
No-override
50000
50000
No-override